Tempish VIBER 80

This model of freestyle skates is suitable for both beginners and experienced skaters with a medium to wide foot. The skate skeleton is well ventilated - ventilation reaches the foot thanks to the holes on the underside of the shoe and a ventilated liner, which contains holes around its entire circumference, including the tongue. the cuff is replaceable and can be tightened if necessary, it also guarantees a longer service life than the articulated rivet. The upper self-locking buckle is metal. The strap is inserted into the skeleton so that it does not catch on the second skate during slalom and freestyle. The instep strap is fitted with a single-stage micro buckle with very comfortable tightening and loosening thanks to the ratchet system.

The plastic protectors on the outside of the skates are replaceable. The holes for the laces are fitted with strong metal rings for the protection of the laces and better tightening. Thanks to the use of waxed laces with a width of 10 mm, it is possible to easily tighten the laces gradually and to close the skate frame more effectively to the foot.

The liner of the skate is ventilated, has holes around its entire circumference and reinforced with PVC in the back. There is an elastic neoprene in the area of the toes for increased comfort. In the back there is a loop with the TEMPISH logo for comfortable carrying of skates. In the area of the Achilles tendon, the liner is lowered and V-shaped, which enhances maneuverability and mobility, and thus easier execution of freestyle elements. The liner has cut-outs in the area of the ankle bend sewn with elastic neoprene, which achieves optimal anatomical dispositions of the liner while maintaining its rigidity. The liner is equipped with a loop for the first row of laces, which further strengthens the position of the liner in the skeleton. The lower part of the liner uses a material that slides less in the skeleton. The shoe has an anatomical insole with a thickness of 3 mm, which is comfortable enough, yet not too soft.

Under the liner in the heel part, the shock absorbing silentblock made of TPR material, which perfectly absorbs vibrations and shocks, is relatively thick, soft and comfortable.

The tongue of the liner is sufficiently stiff and thick, it consists of 2 parts, so it perfectly copies the instep of the foot. The tongue holds the position well thanks to the use of a drawstring.

The chassis made by CNC is strongly reinforced with a three-dimensional structure, very strong, stable and precise. This is the design and construction of the TEMPISH brand. The chassis is attached to the shoe with 2 central screws. The chassis can be adjusted transversely and longitudinally. The hollow axles for weight reduction have a diameter of 8 mm and are mounted on the left skate on the inside and on the right skate on the outside to prevent the screws from loosening while riding.

Key properties:

• Degree of load capacity of sports load: 4
• Fastening system: The laces have a special non-slip surface treatment
• Skeleton: High-impact plastic, double, with ventilation, the joint can be screwed with the possibility of adjusting the position of the upper part of the skeleton, replaceable outer protector
• Inner material: Fine Nylon, absorbent microfiber
• Chassis in-line: CNC construction extra reinforced, one piece, transversely and longitudinally adjustable
• Wheel type: Freestyle SHR PUC, 76 mm|80 mm/85A
• Bearings: ABEC 9 chrome steel + rubber washer
• Brake: No