Tempish Universal brake 2.0

Universal brake 80-100mm

Universal brake for in-line skates, is especially suitable for skates and chassis with a wheel diameter of 80-100 mm. The brake can be mounted on all fitness and children's skates, whose wheel diameter is in the range of 80-100 mm. This brake can also be mounted on 3x100mm chassis. The width of the chassis should not exceed 35mm. The package also contains 2 pieces of axles with a length of 37 mm, which are needed to attach the brake to the chassis to the last 2 wheels. On your skates, you may need a shaft of a different size, which we have in our offer of spare parts for roller skates. The TEMPISH universal brake is ideal for flat chassis with non-recessed axles in the chassis. The height of the brake block can be adjusted to brake as naturally and comfortably as possible. We ideally recommend setting the height 1.5 cm-2 cm above the surface (height varies according to the size of the wheels). You can also readjust the brake block to a more efficient and effective position after it has been partially worn.

Holder material: nylon

Log material: TPR

The brake cannot be used on skates that have the brake holder firmly attached to the chassis (cannot be removed)